linsn led shop

Linsn >> FAQs >> EX901/EX902/EX903

Linsn EX901/EX902/EX903 Multi Function LED Card Features and Difference

EX901/EX901D//EX902/EX903 Specifications:

1.Audio-output:Integrated the audio-signal transmission,free from exteranal audio signal line,amplifier could be connected to the function card directly
2.Light Sensor:Enable brigtness adjust automatically ,256 grades
3.Temperature & Humidity Sensor:Detect the temperature and humidity inside and outside the display,Display the temperature and humidity on the LED Display panel
4.Smoke detection,smoke sensor is needed for this function
5.Remote control:Turn on and off the power of LED display remotely by the LEDstudio.
6.Temperature Alert:Via our software LedStudio,you can set a certain value for turning on the fans automatically,also another value for turning on the air-conditioner.

EX901/EX901D is the normal one. Power supply: 5V DC by four pins power connector or two line connector and Data input/output: RJ45;Physical Connection: Place between sending card and first receiving card. Usually near the led display side.

EX901 linsn led card

EX902/EX902D with more 4 power supply connector,1. LED Display Screen Brightness Automatically Adjustment;2. Internal and External Humidity and Temperature Detection;3. Audio Data Output;4. Remote Power Control.

Linsn EX902

EX903 with Optical Fiber Connection (SFP module: single-mode 20km multi-mode 500m)

EX903 led card

When you need to turn on/off the led display or adjust the brigtness automatically, linsn advise you using the EX901D Multi function card.