linsn hub40a led data transmit card with 2 years warranty, hub40 work with RV901,RV801 led receiving card

HUB40A Function :

Allocate the right signals of receiving card to led display module.

Specification:

Socketed in RV801 and rv901 led receiver.
HUB Model is chosen according to the pin-out of LED Module.
To allocate the right signals to LED Module pins.
Use flat cable (IDE).
If the HUB pin-outs is not exactly the same as the outdoor led module pin-ins,jumper wire can be applied.
Note:

N= GND,

L= LAT or ST,

S= Clk,

O= OE,

E=/OE

R=red data,

G=green data,

U=blue data,

A,B,C,D= row signal,

H=after decoding row signal

F=NC,

V=VCC.