320mmx160mm P20mm RGB Outdoor led module with With High Brightness and high brightness and long veiwing distance. 16x8dots PH20mm outdoor 2R1G1B LED screen panel high waterproof IP65 outdoor DIP346 LED sign module.
LED Module Size: 320mmx160mm
LED Module Brightness: >7000 CD/m2(Nits)
1. DIP Outdoor LED Module Including the Data & Power Cables, Waterproof Rubber Ring.
2. Epistar LEDs, 2 Years Warranty, Ship in 24 hours,Free Online Support.
3. LED Module Can Work With Linsn,Novastar,Colorlight,Xixun LED Conrol Card Etc.
P20mm RGB LED Display Module Parameters:
|Pixel Pitch:||20mm DIP LED|
|Module Resolution:||16×8 dots|
|Driver Mode||1/1 Scan|
|Warranty Time:||2 Years|
|Physical density:||2500 pixels/m2|
|Brightness adjusted:||100 grade by software, or by Auto-optic induced|
|Best view distance:||14m – 200m|
|Best view angle:||Horizontal ±110°, Vertical ±110°|
|Color temperature(k):||5000 — 9500 (choice by user)|
|Whole display flatness:||≤ 1mm juncture|
|Working temperature:||-20°C ~ +50°C|
|Refresh frequency:||≥ 300Hz|
|Humidity(RH):||≤ 90 ~ 95%|
|Protection grade:||IP65 Waterproof|
|Working Voltage:||DC 5V|
|Power supply:||AC 110 / 220V, 50/60Hz|
|Average power consumption:||400 w/m2|
|Max power consumption:||750 w/m2|
|Screen lifetime:||100000 hours|
LED Display Module Aging & Testing
The LED aging test is based on the product’s failure rate curve, which is the characteristics of the bathtub curve, and the countermeasures are adopted to improve the reliability of the product.The indoor led module aging method includes constant current aging and constant pressure aging. A constant current source is that the current is constant at any time. The frequency is not constant. That’s communication or pulsating current. The communication or pulsating current source can be described as the effective value stable, but this power supply cannot be called “constant current source”.Constant current aging is the most consistent feature of LED current operation and is the most scientific method for the aging of LED displays. Over current impact aging and manufacturers the latest clothing design school chooses an aging technique, after using the frequency adjustable, current adjustable constant current source for such aging, in order to judging the quality of the outdoor led module in a short time and can pick out the dangerous LEDs make sure the led display module working well after installation.
The aging of LED display is divided into white balance aging (2×24 hours) and video aging (24 hours).totally 72 hours before packing.
Aging test process of led display screen:
- Check the led display module to install all correct.
- Check whether there is a short circuit or not.
- Check whether the module is flat and neat.
- Check whether the appearance is intact or not.
- Use the online led control system to light up.
Make sure the testing time is continuously light for more than 72 hours
After the aging test, please check the quality control group for parameters.Test content: white balance, red, green, blue,gray gradient,video effect,text effect.after 72 hours aging test,the problem should be reported to the manager of the engineering department in a timely manner.replace or repair the broken leds. making sure all parts will be working well stably before packing.