linsn led shop

Linsn RV908 LED Receiving Card with 16pin Hub75 interface


Linsn >> LED Receiving Card >> RV908 LED Receiver

Linsn RV908 LED Receiving Card,RV908 LED Control Card Work with TS802 LED Sending Card

rv908 led receiving card

Linsn RV908 LED Receiving Card with 16pin Hub75 interface

RV908 is designed for standardized led display products, DO NOT NEED LED Hub Card,The functionality is fully compatible with the RV801D led receiving card, the same size, equial to the RV801 plus HUB75 hub card. it can work with TS802 led sending card.

It has the Features compared with RV801:

1.It has 12 pcs HUB75 of 16P interface,Hub card is no need anymore. 12-bit color HDMI inputs (need to send cards with nine generations)
3.using 18 signal processors, maximum support RGB each 18 (260,000) gray
4.single card maximum support 1024X256 pixels, 1,024 single-point color correction
5.supports single-card color space conversion
6.Support configuration file readback program to copy backup support dual receiver card for demanding performances Screen pixel fault detection (to be supported by a dedicated chip)
10.Support the network cable BERT
11.Support for cable fault detection cabinet door switch monitoring
13.Two fan speed monitoring
14.three-way voltage monitor, all the way for the system, two external power supply box
15.temperature monitoring
16.Humidity Monitor (need humidity sensor)
17.Smoke Monitor (need smoke module)
18.CE-EMC standards in line with EU